Show simple item record

dc.contributor.authorA. Ghassemi
dc.contributor.authorQ. Zhang
dc.date.accessioned2017-05-08T22:40:44Z
dc.date.available2017-05-08T22:40:44Z
dc.date.copyrightJanuary 2006
dc.date.issued2006
dc.identifier.other%28asce%290733-9399%282006%29132%3A1%2826%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/86150
dc.description.abstractThermally induced volumetric changes in rock result in pore pressure variations, and lead to a coupling between the thermal and poromechanical processes. This paper examines the response of a fracture in porothermoelastic rock when subjected to stress, pore pressure, and temperature perturbations. The contribution of each mechanism to the temporal variation of fracture opening is studied to elucidate its effect. This is achieved by development and use of a transient displacement discontinuity (DD) boundary element method for porothermoelasticity. While the full range of the crack opening due to the applied loads is investigated with the porothermoelastic DD, the asymptotic crack opening is ascertained analytically. Good agreement is observed between the numerical and analytical calculations. The results of the study show that, as expected, an applied stress causes the fracture to open while a pore pressure loading reduces the fracture width (aperture). In contrast to the pore pressure effect, cooling of the crack surfaces increases the fracture aperture. It is found that the impact of cooling can be more significant when compared to that of hydraulic loading (i.e., an applied stress and pore pressure) and can cause significant permeability enhancement, particularly for injection/extraction operations that are carried out over a long period of time in geothermal reservoirs.
dc.publisherAmerican Society of Civil Engineers
dc.titlePorothermoelastic Analysis of the Response of a Stationary Crack Using the Displacement Discontinuity Method
dc.typeJournal Paper
dc.journal.volume132
dc.journal.issue1
dc.journal.titleJournal of Engineering Mechanics
dc.identifier.doi10.1061/(ASCE)0733-9399(2006)132:1(26)
dc.treeJournal of Engineering Mechanics:;2006:;Volume ( 132 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record