Show simple item record

dc.contributor.authorKeri L. Ryan
dc.contributor.authorJames M. Kelly
dc.contributor.authorAnil K. Chopra
dc.date.accessioned2017-05-08T22:40:32Z
dc.date.available2017-05-08T22:40:32Z
dc.date.copyrightDecember 2005
dc.date.issued2005
dc.identifier.other%28asce%290733-9399%282005%29131%3A12%281270%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/86031
dc.description.abstractExisting models for isolation bearings neglect certain aspects of their response behavior. For instance, rubber bearings have been observed to decrease in stiffness with increasing axial load, and soften in the vertical direction at large lateral deformations. The yield strength of lead–rubber bearings has also been observed to vary with axial load, such that a lightly loaded bearing may not achieve its theoretical strength. Models that include these axial-load effects in lead–rubber bearings are developed by extending an existing linear two-spring model to include nonlinear behavior. The nonlinearity includes an empirical equation for the experimentally observed variation of yield strength. For numerical implementation, the bearing forces are found by solving the nonlinear equilibrium and kinematic equations using Newton’s method, and the instantaneous bearing stiffness matrix is formed from the differentials of these equations. The response behavior of the models is confirmed by comparison with experimental data.
dc.publisherAmerican Society of Civil Engineers
dc.titleNonlinear Model for Lead–Rubber Bearings Including Axial-Load Effects
dc.typeJournal Paper
dc.journal.volume131
dc.journal.issue12
dc.journal.titleJournal of Engineering Mechanics
dc.identifier.doi10.1061/(ASCE)0733-9399(2005)131:12(1270)
dc.treeJournal of Engineering Mechanics:;2005:;Volume ( 131 ):;issue: 012
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record