Show simple item record

dc.contributor.authorColin MacDougall
dc.contributor.authorF. Michael Bartlett
dc.date.accessioned2017-05-08T22:40:32Z
dc.date.available2017-05-08T22:40:32Z
dc.date.copyrightDecember 2005
dc.date.issued2005
dc.identifier.other%28asce%290733-9399%282005%29131%3A12%281239%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/86028
dc.description.abstractA mechanical model for unbonded seven-wire tendons with broken wires that accounts for the effects of interwire friction and contact forces between the tendon and surrounding concrete is derived. The model is an essential tool for predicting the response, and reliability, of unbonded posttensioned concrete structures containing corroded tendons with broken wires. For the case where the broken wires are symmetrically arranged around the tendon cross section, the model predicts: (1) the strain variation with distance from the break in the broken and unbroken wires; (2) the affected length, where strains in the broken wires are less than those in the unbroken wires; and (3) the prestress force remaining after wire breaks occur. The affected length has practical significance because techniques used in practice to detect wire breaks will fail if performed outside the affected length. Experimental data obtained using a novel strongback beam confirm the response predicted by the model and indicate the coefficient of interwire friction is 0.164 for uncorroded tendons.
dc.publisherAmerican Society of Civil Engineers
dc.titleMechanical Model for Unbonded Seven-Wire Tendon with Symmetric Wire Breaks
dc.typeJournal Paper
dc.journal.volume131
dc.journal.issue12
dc.journal.titleJournal of Engineering Mechanics
dc.identifier.doi10.1061/(ASCE)0733-9399(2005)131:12(1239)
dc.treeJournal of Engineering Mechanics:;2005:;Volume ( 131 ):;issue: 012
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record