Show simple item record

dc.contributor.authorE. Giner
dc.contributor.authorD. A. Hills
dc.contributor.authorF. J. Fuenmayor
dc.date.accessioned2017-05-08T22:40:30Z
dc.date.available2017-05-08T22:40:30Z
dc.date.copyrightNovember 2005
dc.date.issued2005
dc.identifier.other%28asce%290733-9399%282005%29131%3A11%281146%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/86016
dc.description.abstractA fretting fatigue test for a complete contact problem is modeled using the finite element method. The objective is to obtain the response of the specimen-indenter contact under loading–unloading cycles. These are generated by applying a cyclic shear load to the indenter, whose maximum value does not cause global sliding of the indenter, but only partial slip. The evolution of the contact conditions over several cycles is studied, as well as the intensity of the singularities present at the left and right corners, measured through the generalized stress intensity factors. In addition, some conclusions regarding the conditions that lead to partial slip are inferred. This represents a stage in the development of an asymptote-based fretting fatigue model.
dc.publisherAmerican Society of Civil Engineers
dc.titleComplete Elastic Contact Subject to Cyclic Shear in Partial Slip
dc.typeJournal Paper
dc.journal.volume131
dc.journal.issue11
dc.journal.titleJournal of Engineering Mechanics
dc.identifier.doi10.1061/(ASCE)0733-9399(2005)131:11(1146)
dc.treeJournal of Engineering Mechanics:;2005:;Volume ( 131 ):;issue: 011
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record