Show simple item record

dc.contributor.authorVennela Challa
dc.contributor.authorKathleen A. Issen
dc.date.accessioned2017-05-08T22:40:27Z
dc.date.available2017-05-08T22:40:27Z
dc.date.copyrightSeptember 2004
dc.date.issued2004
dc.identifier.other%28asce%290733-9399%282004%29130%3A9%281089%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/85978
dc.description.abstractCompaction bands, a form of localized deformation found in field and laboratory specimens of high porosity rock, consist of planar zones of pure compressional deformation that form perpendicular to maximum compression. Experimentalists report compaction bands and/or shear bands (angled to maximum compression) in high porosity sandstone during a transitional loading regime with multiple active deformation mechanisms. Conditions for localized deformation are determined using a two-yield surface constitutive model and bifurcation theory. The shear yield surface corresponds to a dilatant, frictional mechanism while the cap corresponds to a compactant mechanism. Unlike a single yield surface model, the two-yield surface model predicts both experimentally observed band types for reported values of key material parameters. Observed and predicted shear band angles generally agree. Theory suggests that shear band formation may coincide with activation of the shear yield surface by a previously active cap. If the bulk hardening modulus,
dc.publisherAmerican Society of Civil Engineers
dc.titleConditions for Compaction Band Formation in Porous Rock Using a Two-Yield Surface Model
dc.typeJournal Paper
dc.journal.volume130
dc.journal.issue9
dc.journal.titleJournal of Engineering Mechanics
dc.identifier.doi10.1061/(ASCE)0733-9399(2004)130:9(1089)
dc.treeJournal of Engineering Mechanics:;2004:;Volume ( 130 ):;issue: 009
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record