Show simple item record

dc.contributor.authorJ. Ching
dc.contributor.authorJ. L. Beck
dc.date.accessioned2017-05-08T22:40:15Z
dc.date.available2017-05-08T22:40:15Z
dc.date.copyrightOctober 2004
dc.date.issued2004
dc.identifier.other%28asce%290733-9399%282004%29130%3A10%281233%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/85829
dc.description.abstractA two-step probabilistic structural health monitoring approach is used to analyze the Phase II experimental benchmark studies sponsored by the IASC–ASCE Task Group on Structural Health Monitoring. This study involves damage detection and assessment of the test structure using experimental data generated by hammer impact and ambient vibrations. The two-step approach involves modal identification followed by damage assessment using the pre- and postdamage modal parameters based on the Bayesian updating methodology. An Expectation–Maximization algorithm is proposed to find the most probable values of the parameters. It is shown that the brace damage can be successfully detected and assessed from either the hammer or ambient vibration data. The connection damage is much more difficult to reliably detect and assess because the identified modal parameters are less sensitive to connection damage, allowing the modeling errors to have more influence on the results.
dc.publisherAmerican Society of Civil Engineers
dc.titleBayesian Analysis of the Phase II IASC–ASCE Structural Health Monitoring Experimental Benchmark Data
dc.typeJournal Paper
dc.journal.volume130
dc.journal.issue10
dc.journal.titleJournal of Engineering Mechanics
dc.identifier.doi10.1061/(ASCE)0733-9399(2004)130:10(1233)
dc.treeJournal of Engineering Mechanics:;2004:;Volume ( 130 ):;issue: 010
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record