Show simple item record

dc.contributor.authorJ. Liu
dc.contributor.authorC. Vipulanandan
dc.date.accessioned2017-05-08T22:40:02Z
dc.date.available2017-05-08T22:40:02Z
dc.date.copyrightApril 2003
dc.date.issued2003
dc.identifier.other%28asce%290733-9399%282003%29129%3A4%28426%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/85720
dc.description.abstractThe behavior of coated cement concrete in water and sulfuric acid was investigated over a three-year period. Two epoxy-based coatings were selected and cylindrical concrete specimens were coated and used in this investigation. The concrete-to-coating mass transfer coefficient ratio varied from 8 to 10. The penetration of liquids through bulk coating materials and coated concrete with and without holidays (pinholes) was studied. The mass change of the specimens was measured at regular intervals and a total of 64 coated specimens were tested. Coated concrete specimens with and without holidays had different performance with long-term immersion in deionized (DI) water and 3% sulfuric acid. Mass transfer models were developed using film and bulk concepts and were used to predict the increase in mass in coated concrete in nonreactive DI water and reactive 3% sulfuric acid solutions. The mass transfer model parameters for various solution-coating combinations were obtained from experiment data. The parameters of the effect of holiday size on the liquid transport process were also identified based on the experiment results.
dc.publisherAmerican Society of Civil Engineers
dc.titleModeling Water and Sulfuric Acid Transport through Coated Cement Concrete
dc.typeJournal Paper
dc.journal.volume129
dc.journal.issue4
dc.journal.titleJournal of Engineering Mechanics
dc.identifier.doi10.1061/(ASCE)0733-9399(2003)129:4(426)
dc.treeJournal of Engineering Mechanics:;2003:;Volume ( 129 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record