Show simple item record

dc.contributor.authorE. Denarié
dc.contributor.authorV. E. Saouma
dc.contributor.authorA. Iocco
dc.contributor.authorD. Varelas
dc.date.accessioned2017-05-08T22:39:33Z
dc.date.available2017-05-08T22:39:33Z
dc.date.copyrightMay 2001
dc.date.issued2001
dc.identifier.other%28asce%290733-9399%282001%29127%3A5%28494%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/85380
dc.description.abstractThe characterization of the fracture process zone inside a cracked concrete specimen is investigated through optical fiber technology. Fiber Bragg gratings are used to measure the strains in the close vicinity of the crack front, thus enabling us (for the first time) to directly measure those deformations inside the concrete specimen. A detailed discussion of the experimental technique is first provided. Then, following the experimental measurements, test results are presented and discussed. Preliminary results indicate that there is a narrow zone on each side of the crack front with inelastic residual strains, and another where strains increase only in the presence of a neighboring crack tip. The width of the process zone is found to be about three times the maximum aggregate size.
dc.publisherAmerican Society of Civil Engineers
dc.titleConcrete Fracture Process Zone Characterization with Fiber Optics
dc.typeJournal Paper
dc.journal.volume127
dc.journal.issue5
dc.journal.titleJournal of Engineering Mechanics
dc.identifier.doi10.1061/(ASCE)0733-9399(2001)127:5(494)
dc.treeJournal of Engineering Mechanics:;2001:;Volume ( 127 ):;issue: 005
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record