Show simple item record

dc.contributor.authorJames G. A. Croll
dc.date.accessioned2017-05-08T22:39:32Z
dc.date.available2017-05-08T22:39:32Z
dc.date.copyrightApril 2001
dc.date.issued2001
dc.identifier.other%28asce%290733-9399%282001%29127%3A4%28333%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/85360
dc.description.abstractBuckling of thin cylindrical shell liners used for the stabilization of soft ground tunnels is treated as the buckling of an elastic ring restrained radially and tangentially by an infinite surrounding elastic medium. Stiffness components for the elastic medium are derived and used to provide various levels of approximation for the elastic critical loads and associated modes of the liner when subject to overburden pressure loading. For most practical tunnel liners, elastic buckling is found to occur in modes having relatively short circumferential wavelengths. In these circumstances an approximation introduced into the critical pressure analysis allows both the lowest critical pressure and its associated mode shape to be represented explicitly in terms of a single “soft ground tunnel buckling parameter”; this single composite parameter encapsulates all the relevant ground and liner geometric and material properties. It is this closed-form analytical representation of elastic critical buckling that provides a particularly convenient basis for predicting elastic-plastic failure. When imperfections are introduced, liner collapse and the various forms of ground failure can be modeled by methods analogous to the Ayrton-Perry expression for columns. Two generalized imperfection parameters emerge: one for liner collapse and the other for each of three possible, soft ground, failure modes. It is suggested that the analytical simplicity of the approach should make it an attractive alternative basis for at least the initial, rational, design of soft ground tunnel liners.
dc.publisherAmerican Society of Civil Engineers
dc.titleBuckling of Cylindrical Tunnel Liners
dc.typeJournal Paper
dc.journal.volume127
dc.journal.issue4
dc.journal.titleJournal of Engineering Mechanics
dc.identifier.doi10.1061/(ASCE)0733-9399(2001)127:4(333)
dc.treeJournal of Engineering Mechanics:;2001:;Volume ( 127 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record