Show simple item record

dc.contributor.authorJ. F. Favier
dc.contributor.authorM. H. Abbaspour-Fard
dc.contributor.authorM. Kremmer
dc.date.accessioned2017-05-08T22:39:25Z
dc.date.available2017-05-08T22:39:25Z
dc.date.copyrightOctober 2001
dc.date.issued2001
dc.identifier.other%28asce%290733-9399%282001%29127%3A10%28971%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/85289
dc.description.abstractIn this paper axisymmetrical particles are modeled as multisphere discrete elements using a method in which particles are represented by overlapping spheres, fixed rigidly with respect to a local coordinate system. Contact detection is sphere-based and the resultant forces are transformed to the particle centroid to calculate the particle motion using standard discrete element method conventions. The multisphere method was used to model discharge of ellipse-shaped particles through an orifice in a flat-bottomed hopper and the simulations compared with physical experiments at the same scale. There was good agreement between the flow behavior of the simulated and physical particle assemblies for all orifice sizes. The rate of discharge and the vertical velocity profiles in the region of converging flow determined for the simulated and physical flows were in close agreement for flow from the larger orifices. A similar relationship between frequency of arch formation, particle mean diameter, and orifice diameter as for spheres was observed.
dc.publisherAmerican Society of Civil Engineers
dc.titleModeling Nonspherical Particles Using Multisphere Discrete Elements
dc.typeJournal Paper
dc.journal.volume127
dc.journal.issue10
dc.journal.titleJournal of Engineering Mechanics
dc.identifier.doi10.1061/(ASCE)0733-9399(2001)127:10(971)
dc.treeJournal of Engineering Mechanics:;2001:;Volume ( 127 ):;issue: 010
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record