Show simple item record

dc.contributor.authorZdeněk P. Bažant
dc.contributor.authorFerhun C. Caner
dc.contributor.authorIgnacio Carol
dc.contributor.authorMark D. Adley
dc.contributor.authorStephen A. Akers
dc.date.accessioned2017-05-08T22:39:22Z
dc.date.available2017-05-08T22:39:22Z
dc.date.copyrightSeptember 2000
dc.date.issued2000
dc.identifier.other%28asce%290733-9399%282000%29126%3A9%28944%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/85259
dc.description.abstractThe first part of this two-part study presents a new improved microplane constitutive model for concrete, representing the fourth version in the line of microplane models developed at Northwestern University. The constitutive law is characterized as a relation between the normal, volumetric, deviatoric, and shear stresses and strains on planes of various orientations, called the microplanes. The strain components on the microplanes are the projections of the continuum strain tensor, and the continuum stresses are obtained from the microplane stress components according to the principle of virtual work. The improvements include (1) a work-conjugate volumetric deviatoric split—the main improvement, facilitating physical interpretation of stress components; (2) additional horizontal boundaries (yield limits) for the normal and deviatoric microplane stress components, making it possible to control the curvature at the peaks of stress-strain curves; (3) an improved nonlinear frictional yield surface with plasticity asymptote; (4) a simpler and more effective fitting procedure with sequential identification of material parameters; (5) a method to control the steepness and tail length of postpeak softening; and (6) damage modeling with a reduction of unloading stiffness and crack-closing boundary. The second part of this study, by Caner and Bažant, will present an algorithm for implementing the model in structural analysis programs and provide experimental verification and calibration by test data.
dc.publisherAmerican Society of Civil Engineers
dc.titleMicroplane Model M4 for Concrete. I: Formulation with Work-Conjugate Deviatoric Stress
dc.typeJournal Paper
dc.journal.volume126
dc.journal.issue9
dc.journal.titleJournal of Engineering Mechanics
dc.identifier.doi10.1061/(ASCE)0733-9399(2000)126:9(944)
dc.treeJournal of Engineering Mechanics:;2000:;Volume ( 126 ):;issue: 009
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record