Show simple item record

dc.contributor.authorP. A. Berry
dc.contributor.authorJ. M. Rotter
dc.contributor.authorR. Q. Bridge
dc.date.accessioned2017-05-08T22:39:14Z
dc.date.available2017-05-08T22:39:14Z
dc.date.copyrightApril 2000
dc.date.issued2000
dc.identifier.other%28asce%290733-9399%282000%29126%3A4%28405%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/85177
dc.description.abstractThe behavior of thin cylindrical shells under axial compression is very sensitive to imperfections in the initial geometry. Local axisymmetric imperfections are among the most detrimental and have been shown to be a regular feature of circumferentially welded joints in civil engineering shell structures such as steel silos and tanks. Many of the experiments on which current design rules are based were performed on elastic Mylar, copper, or aluminum specimens, which have some very different characteristics to those of steel shells. Furthermore, very few laboratory tests have ever examined the consequences of fabrication processes on shell buckling strength, although these strongly influence the amplitudes and forms of geometric imperfections. This paper presents the findings of a careful experimental program on large steel cylinders fabricated with a fully welded circumferential joint. Thorough measurements were made of the initial imperfections and their transformation into a buckling mode. The results are compared with elastic-plastic finite-element predictions and the most recent design standard.
dc.publisherAmerican Society of Civil Engineers
dc.titleCompression Tests on Cylinders with Circumferential Weld Depressions
dc.typeJournal Paper
dc.journal.volume126
dc.journal.issue4
dc.journal.titleJournal of Engineering Mechanics
dc.identifier.doi10.1061/(ASCE)0733-9399(2000)126:4(405)
dc.treeJournal of Engineering Mechanics:;2000:;Volume ( 126 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record