Show simple item record

dc.contributor.authorSami El-Sayed
dc.contributor.authorSrinivasan Sridharan
dc.date.accessioned2017-05-08T22:39:05Z
dc.date.available2017-05-08T22:39:05Z
dc.date.copyrightOctober 2000
dc.date.issued2000
dc.identifier.other%28asce%290733-9399%282000%29126%3A10%281033%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/85095
dc.description.abstractA delaminated composite ring under external pressure is studied to understand the effect of curvature on delamination buckling and growth. Examples with differing crack lengths and delamination locations were considered. In all cases, the delamination surfaces come in contact rather early in the loading history, no matter what the initial imperfections are assumed to be. Furthermore, the delaminated part never becomes separated from the main ring. The modes of buckling given by standard linear stability analysis do not play any role in the behavior. Strain energy release rates were computed with the objective of predicting possible crack growth. Because of the contact, total energy release rate is dominated by the shear mode. Because the critical values of energy release rates are generally much higher in the shear mode than in the opening mode, one may conclude that shells tend to be more delamination tolerant than plates in which the opening modes tend to dominate.
dc.publisherAmerican Society of Civil Engineers
dc.titleDelamination Buckling and Growth in Rings under Pressure
dc.typeJournal Paper
dc.journal.volume126
dc.journal.issue10
dc.journal.titleJournal of Engineering Mechanics
dc.identifier.doi10.1061/(ASCE)0733-9399(2000)126:10(1033)
dc.treeJournal of Engineering Mechanics:;2000:;Volume ( 126 ):;issue: 010
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record