Show simple item record

dc.contributor.authorWei Jiang
dc.date.accessioned2017-05-08T22:38:55Z
dc.date.available2017-05-08T22:38:55Z
dc.date.copyrightApril 1999
dc.date.issued1999
dc.identifier.other%28asce%290733-9399%281999%29125%3A4%28487%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/84984
dc.description.abstractThis paper first points out that an evolution rule of the yield center without a motion component in the plastic strain rate direction leads to ratchetting, while an evolution rule with such a component motion leads to proportional material response. The paper then successfully tackles such a dilemma by proposing a general kinematic-isotropic hardening model that is able to control the yield center motion and to allow the radius of the yield surface to evolve arbitrarily as needed. Theoretical analysis shows that this model is capable of describing all the possible material responses. With a plastic modulus also proposed in the paper, an example is then given to show that the theoretical prediction compares very well with the ratchetting test.
dc.publisherAmerican Society of Civil Engineers
dc.titleGeneral Kinematic-Isotropic Hardening Model
dc.typeJournal Paper
dc.journal.volume125
dc.journal.issue4
dc.journal.titleJournal of Engineering Mechanics
dc.identifier.doi10.1061/(ASCE)0733-9399(1999)125:4(487)
dc.treeJournal of Engineering Mechanics:;1999:;Volume ( 125 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record