Show simple item record

dc.contributor.authorZdeněk P. Bažant
dc.contributor.authorEmilie Becq-Giraudon
dc.date.accessioned2017-05-08T22:38:52Z
dc.date.available2017-05-08T22:38:52Z
dc.date.copyrightMarch 1999
dc.date.issued1999
dc.identifier.other%28asce%290733-9399%281999%29125%3A3%28331%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/84958
dc.description.abstractThe ductility of an elastic structure with a growing crack may be defined as the ratio of the additional load-point displacement that is caused by the crack at the moment of loss of stability under displacement control to the elastic displacement at no crack at the moment of peak load. The stability loss at displacement control is known to occur when the load-deflection curve of the whole structural system with the loading device (characterized by a spring) reaches a snapback point. Based on the known stress intensity factor as a function of crack length, the well-known method of linear elastic fracture mechanics is used to calculate the load-deflection curve and determine the states of snapback and maximum loads. An example of a notched three-point bend beam with a growing crack is analyzed numerically. The ductility is determined and its dependence of the structure size, slenderness, and stiffness of the loading device is clarified. The family of the curves of ductility versus structure size at various loading device stiffnesses is found to exhibit at a certain critical stiffness a transition from bounded single-valued functions of
dc.publisherAmerican Society of Civil Engineers
dc.titleEffects of Size and Slenderness on Ductility of Fracturing Structures
dc.typeJournal Paper
dc.journal.volume125
dc.journal.issue3
dc.journal.titleJournal of Engineering Mechanics
dc.identifier.doi10.1061/(ASCE)0733-9399(1999)125:3(331)
dc.treeJournal of Engineering Mechanics:;1999:;Volume ( 125 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record