Show simple item record

dc.contributor.authorMohammad Z. Kabir
dc.contributor.authorArchibald N. Sherbourne
dc.date.accessioned2017-05-08T22:38:42Z
dc.date.available2017-05-08T22:38:42Z
dc.date.copyrightJuly 1998
dc.date.issued1998
dc.identifier.other%28asce%290733-9399%281998%29124%3A7%28754%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/84826
dc.description.abstractInteractive buckling of fibrous composite I-section beams is discussed in this paper. As a result of a linear combination of local and lateral-torsional buckling modes, which may arise when the critical loads of these two types of buckling are nearly the same, a large degradation in the failure load capacity may occur. In this study, the flanges are considered as beam elements when the member bends laterally under the prebuckling stress distribution and as plate elements for normal bending and twisting; the web is analyzed as a plate element. Within the framework of the Rayleigh-Ritz method, a displacement function formulation is employed using compatibility conditions at the junction between flange and web for unifying the analytical treatment and reducing the problem size. The effect of the combined in-plane stresses, produced by longitudinally varying stresses due to the applied transverse loads, on the critical load also is discussed.
dc.publisherAmerican Society of Civil Engineers
dc.titleLateral-Torsional Buckling of Post-Local Buckled Fibrous Composite Beams
dc.typeJournal Paper
dc.journal.volume124
dc.journal.issue7
dc.journal.titleJournal of Engineering Mechanics
dc.identifier.doi10.1061/(ASCE)0733-9399(1998)124:7(754)
dc.treeJournal of Engineering Mechanics:;1998:;Volume ( 124 ):;issue: 007
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record