Show simple item record

dc.contributor.authorKazuyoshi Iwashita
dc.contributor.authorMasanobu Oda
dc.date.accessioned2017-05-08T22:38:35Z
dc.date.available2017-05-08T22:38:35Z
dc.date.copyrightMarch 1998
dc.date.issued1998
dc.identifier.other%28asce%290733-9399%281998%29124%3A3%28285%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/84760
dc.description.abstractTo simulate numerically the microstructure of shear bands, the distinct element method was modified such that the effect of rolling resistance at contacts could be taken into account. To this end, the relative movement by rolling is related to the relative rotation between two particles with a common contact, which makes it possible to generalize the conservation law of angular momentum for a more general case than the moments can be transmitted through contacts. Not only the generation of large voids inside a shear band but also the high gradient of particle rotation along the shear band boundaries can be reproduced, in a manner quite similar to those of natural granular soils, when the rolling resistance at contacts is considered. The development of columns is a common feature that appears in the strain hardening process, and buckling of the columns parallels the development of shear bands. The generation of large voids and the high gradient of particle rotation are produced as a result of the buckling of the columns.
dc.publisherAmerican Society of Civil Engineers
dc.titleRolling Resistance at Contacts in Simulation of Shear Band Development by DEM
dc.typeJournal Paper
dc.journal.volume124
dc.journal.issue3
dc.journal.titleJournal of Engineering Mechanics
dc.identifier.doi10.1061/(ASCE)0733-9399(1998)124:3(285)
dc.treeJournal of Engineering Mechanics:;1998:;Volume ( 124 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record