Show simple item record

dc.contributor.authorYu Zhao
dc.contributor.authorM. Keith Sharp
dc.contributor.authorKen James
dc.date.accessioned2017-05-08T22:38:27Z
dc.date.available2017-05-08T22:38:27Z
dc.date.copyrightOctober 1998
dc.date.issued1998
dc.identifier.other%28asce%290733-9399%281998%29124%3A10%281151%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/84698
dc.description.abstractThe control volume-based finite-element method was used to investigate the transverse lift on a circular cylinder in a two-dimensional (2D) channel flow. The study was organized in two consecutive steps: (1) Flow past a stationary cylinder; and (2) flow past a freely translating and rotating cylinder. The ratio of the diameter of the cylinder-to-height of the channel was 0.1. The effects contributing to the lift from the fluid inertia, the rotation of the cylinder, and the proximity of the cylinder to the wall of the channel were explored. The results showed that with a stationary cylinder model, the lift was positive everywhere across the channel and pushed the cylinder toward the center of the channel; however, with a freely translating cylinder model, the lift was positive when
dc.publisherAmerican Society of Civil Engineers
dc.titleFinite-Element Analysis of Transverse Lift on Circular Cylinder in 2D Channel Flow
dc.typeJournal Paper
dc.journal.volume124
dc.journal.issue10
dc.journal.titleJournal of Engineering Mechanics
dc.identifier.doi10.1061/(ASCE)0733-9399(1998)124:10(1151)
dc.treeJournal of Engineering Mechanics:;1998:;Volume ( 124 ):;issue: 010
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record