Show simple item record

dc.contributor.authorPaulo B. Lourenço
dc.contributor.authorJan G. Rots
dc.date.accessioned2017-05-08T22:38:21Z
dc.date.available2017-05-08T22:38:21Z
dc.date.copyrightJuly 1997
dc.date.issued1997
dc.identifier.other%28asce%290733-9399%281997%29123%3A7%28660%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/84631
dc.description.abstractThe performance of an interface elastoplastic constitutive model for the analysis of unreinforced masonry structures is evaluated. Both masonry components are discretized aiming at a rational unit-joint model able to describe cracking, slip, and crushing of the material. The model is formulated in the spirit of softening plasticity for tension, shear and compression, with consistent treatment of the intersections defined by these modes. The numerical implementation is based on modern algorithmic concepts such as local and global Newton-Raphson methods, implicit integration of the rate equations and consistent tangent stiffness matrices. The parameters necessary to define the model are derived from microexperiments in units, joints, and small masonry samples. The model is used to analyze masonry shear-walls and is capable of predicting the experimental collapse load and behaviour accurately. Detailed comparisons between experimental and numerical results permit a clear understanding of the walls structural behavior, flow of internal forces and redistribution of stresses both in the preand post-peak regime.
dc.publisherAmerican Society of Civil Engineers
dc.titleMultisurface Interface Model for Analysis of Masonry Structures
dc.typeJournal Paper
dc.journal.volume123
dc.journal.issue7
dc.journal.titleJournal of Engineering Mechanics
dc.identifier.doi10.1061/(ASCE)0733-9399(1997)123:7(660)
dc.treeJournal of Engineering Mechanics:;1997:;Volume ( 123 ):;issue: 007
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record