Show simple item record

dc.contributor.authorVictor C. Li
dc.date.accessioned2017-05-08T22:38:19Z
dc.date.available2017-05-08T22:38:19Z
dc.date.copyrightMay 1997
dc.date.issued1997
dc.identifier.other%28asce%290733-9399%281997%29123%3A5%28531%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/84607
dc.description.abstractThis brief paper addresses the application of the J-integral to fracture analysis and toughness characterization of quasi-brittle materials, with specific focus on the tension-softening behavior in the fracture process zone. Concern is often raised on the validity of the J-integral when unloading occurs in the material points along which the J-integral contour path traverses, particularly during process-zone growth. This paper clarifies that this concern is misplaced. Whereas the J-integral contour wraps around the tension-softening line springs of the bridging elements in the process zone, the material points on the J-integral contour undergoes elastic loading and unloading. Therefore application of the J-integral to quasi-brittle materials does not violate the basic tenet of the assumption of nonlinear elastic material behavior underlying the J-integral theoretical formulation.
dc.publisherAmerican Society of Civil Engineers
dc.titleApplicability of J-Integral to Tension-Softening Materials
dc.typeJournal Paper
dc.journal.volume123
dc.journal.issue5
dc.journal.titleJournal of Engineering Mechanics
dc.identifier.doi10.1061/(ASCE)0733-9399(1997)123:5(531)
dc.treeJournal of Engineering Mechanics:;1997:;Volume ( 123 ):;issue: 005
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record