Show simple item record

dc.contributor.authorJung-Heum Yon
dc.contributor.authorNeil M. Hawkins
dc.contributor.authorAlbert S. Kobayashi
dc.date.accessioned2017-05-08T22:38:14Z
dc.date.available2017-05-08T22:38:14Z
dc.date.copyrightMarch 1997
dc.date.issued1997
dc.identifier.other%28asce%290733-9399%281997%29123%3A3%28196%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/84560
dc.description.abstractFracture properties for linear elastic fracture mechanics (LEFM), singular-fracture process zone (S-FPZ), and nonsingular-fracture process zone (NS-FPZ) models were determined from the experimental results of three-point bend tests. The responses for each fracture model were numerically calculated and compared. All three fracture models could simulate the measured load and crack mouth opening displacement (CMOD) versus load-point displacement relations. However, for the LEFM model the stress intensity factor needed to increase continuously with crack extension, and for the S-FPZ model the fracture process zone characteristics need to change continuously if the critical stress intensity factor was to remain constant. The LEFM model showed the largest resistance and the slowest crack extension, while the NS-FPZ model showed the smallest resistance and the fastest crack extension. The responses for the S-FPZ model were intermediate between those for the LEFM and NS-FPZ models and the total fracture energy densities for the S-FPZ and NS-FPZ models were equal.
dc.publisherAmerican Society of Civil Engineers
dc.titleComparisons of Concrete Fracture Models
dc.typeJournal Paper
dc.journal.volume123
dc.journal.issue3
dc.journal.titleJournal of Engineering Mechanics
dc.identifier.doi10.1061/(ASCE)0733-9399(1997)123:3(196)
dc.treeJournal of Engineering Mechanics:;1997:;Volume ( 123 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record