Show simple item record

dc.contributor.authorHenri P. Gavin
dc.date.accessioned2017-05-08T22:38:02Z
dc.date.available2017-05-08T22:38:02Z
dc.date.copyrightAugust 1996
dc.date.issued1996
dc.identifier.other%28asce%290733-9399%281996%29122%3A8%28736%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/84457
dc.description.abstractThe radial, lateral, and tangential stiffness of spoked bicycle wheels depends upon the rim's bending inertia, torsional inertia, the spoke sizes, and the spoke geometry. The spokes of three rear bicycle wheels of different spoke patterns were instrumented with strain gauges in order to investigate the effect of the spoke pattern on the spoke strain and fatigue resistance properties of the wheels. Spoke strains due to radial loads were measured in the laboratory. Time records of the strain of a right pulling spoke were collected from each of the wheels under actual riding conditions. Analytical, numerical, laboratory, and field studies show that spoke strains due to radial loads and in service conditions are insensitive to the spoke pattern. Small variations in the spoke strains between the wheels in the road tests can be attributed to variations in the loads, but do not significantly affect the fatigue life of the wheels.
dc.publisherAmerican Society of Civil Engineers
dc.titleBicycle-Wheel Spoke Patterns and Spoke Fatigue
dc.typeJournal Paper
dc.journal.volume122
dc.journal.issue8
dc.journal.titleJournal of Engineering Mechanics
dc.identifier.doi10.1061/(ASCE)0733-9399(1996)122:8(736)
dc.treeJournal of Engineering Mechanics:;1996:;Volume ( 122 ):;issue: 008
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record