Show simple item record

dc.contributor.authorClaude Jolicoeur
dc.contributor.authorAlain Cardou
dc.date.accessioned2017-05-08T22:38:01Z
dc.date.available2017-05-08T22:38:01Z
dc.date.copyrightJuly 1996
dc.date.issued1996
dc.identifier.other%28asce%290733-9399%281996%29122%3A7%28643%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/84443
dc.description.abstractSemicontinuous wire strand modeling is an approach by which each layer of a strand is mathematically represented by an orthotropic cylinder whose mechanical properties are chosen to match the behavior of its corresponding layer of wires. Such a semicontinuous model is herein proposed for the analysis of multilayered wire strands under bending, tensile, and torsion loads. It is based on continuum mechanics and elasticity of orthotropic materials. The model permits the evaluation of strand stiffness, contact stress, interlayer shear stress, and interlayer slip. Results are obtained and given for a seven-wire strand and for selected steel reinforced aluminum conductors (ACSRs). Comparisons are made with results from two existing models that use a more classical approach, from another model that uses a semicontinuous approach, and from published experimental works. Under tensile and torsion loads, it is shown that the present semicontinuous model gives very accurate results. Under bending load, validation is more difficult to establish, but this new model is very promising.
dc.publisherAmerican Society of Civil Engineers
dc.titleSemicontinuous Mathematical Model for Bending of Multilayered Wire Strands
dc.typeJournal Paper
dc.journal.volume122
dc.journal.issue7
dc.journal.titleJournal of Engineering Mechanics
dc.identifier.doi10.1061/(ASCE)0733-9399(1996)122:7(643)
dc.treeJournal of Engineering Mechanics:;1996:;Volume ( 122 ):;issue: 007
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record