Show simple item record

dc.contributor.authorVlado A. Lubarda
dc.contributor.authorSreten Mastilovic
dc.contributor.authorJaroslaw Knap
dc.date.accessioned2017-05-08T22:37:59Z
dc.date.available2017-05-08T22:37:59Z
dc.date.copyrightJuly 1996
dc.date.issued1996
dc.identifier.other%28asce%290733-9399%281996%29122%3A7%28633%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/84442
dc.description.abstractA pressure-dependent cap model that is capable of describing the brittle-ductile transition in porous rocks is proposed. The model consists of a hardening Drucker-Prager yield cone with a nonassociative flow rule, an ellipsoidal cap with an associative flow rule, and a failure or limiting surface. This surface designates the stress states at the inception of failure below brittle-ductile transition, or the onset of ideally plastic response above brittle-ductile transition. The appropriately combined structures of the associative and nonassociative flow rules eliminate the difficulties associated with a singular corner region at the intersection of the cap and failure surface. A cross hardening between the cap and cone is discussed. The model is capable of a good qualitative agreement with experimental data, as demonstrated by the results of the triaxial compression tests under various amounts of the confining pressure. A stress-strain response with inelastic volume dilatancy at lower confinements, and an increased ductility and hardening rates at higher confinements, are well predicted.
dc.publisherAmerican Society of Civil Engineers
dc.titleBrittle-Ductile Transition in Porous Rocks by Cap Model
dc.typeJournal Paper
dc.journal.volume122
dc.journal.issue7
dc.journal.titleJournal of Engineering Mechanics
dc.identifier.doi10.1061/(ASCE)0733-9399(1996)122:7(633)
dc.treeJournal of Engineering Mechanics:;1996:;Volume ( 122 ):;issue: 007
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record