Show simple item record

dc.contributor.authorMarco Petrangeli
dc.contributor.authorJoško Ožbolt
dc.date.accessioned2017-05-08T22:37:56Z
dc.date.available2017-05-08T22:37:56Z
dc.date.copyrightJune 1996
dc.date.issued1996
dc.identifier.other%28asce%290733-9399%281996%29122%3A6%28545%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/84427
dc.description.abstractSince the smeared crack concept has proved to be very attractive when used in the finite-element fracture analysis, many different material models have been put forward. The majority of these models, usually known as a single or multiple crack models, are based on a linear elastic material constitutive law coupled in series with a softening crack-bridging law. The crack-bridging law on the plane where tensile fracture occurs, although defined in terms of stresses and strains, is basically the same vectorial relation used in the discrete crack approach. These models yield some problems due to the nonconsistency of the basic hypothesis and sharp discontinuities in the resulting material behavior. In this paper some of these problems are analyzed and compared with concepts and results coming from the nonlocal microplane material model. Numerical studies on the material and finite-element level using both approaches are reported.
dc.publisherAmerican Society of Civil Engineers
dc.titleSmeared Crack Approaches—Material Modeling
dc.typeJournal Paper
dc.journal.volume122
dc.journal.issue6
dc.journal.titleJournal of Engineering Mechanics
dc.identifier.doi10.1061/(ASCE)0733-9399(1996)122:6(545)
dc.treeJournal of Engineering Mechanics:;1996:;Volume ( 122 ):;issue: 006
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record