• Login
    View Item 
    •   DSpace Home
    • ASCE
    • Journal of Engineering Mechanics
    • View Item
    •   DSpace Home
    • ASCE
    • Journal of Engineering Mechanics
    • View Item
    JavaScript is disabled for your browser. Some features of this site may not work without it.

    Zero-Brittleness Size-Effect Method for One-Size Fracture Test of Concrete

    Thumbnail
    View/Open
    %28asce%290733-9399%281996%29122%3A5%28458%29.pdf (1.313Mb)
    Date
    1996
    Author
    Zdeněk P. Bažant
    Zhengzhi Li
    Metadata
    Show full item record
    Abstract
    This paper proposes a new and less laborious version of the size-effect method for measuring the fracture energy or fracture toughness of concrete as well as other nonlinear fracture characteristics, such as the effective length of fracture process zone or critical crack-tip opening displacement. The size-effect method, based on the size-effect law, is the simplest to carry out because only the maximum loads of specimens need to be measured. No measurements of postpeak deflection and unloading stiffness, nor observations of crack-tip location, are needed; the testing machine need not be very stiff, and there is no need for closed-loop displacement control. The simplicity of the method makes it suitable not only for the laboratory but also for field quality control. In the original version of the size-effect method, notched specimens of different sizes are tested. The proposed new version further simplifies testing by allowing the use of notched specimens of only one size. The idea is to supplement the one-size notched-beam tests with an evaluation of the maximum load value for specimens with a zero-brittleness number. There are two types of methods that will achieve this. In one type of method, zero-brittleness data are obtained by using plastic limit analysis based on the modulus of rupture or compression strength of concrete to calculate the limiting nominal strength for zero specimen size. In the second type of method, zero-brittleness data are obtained by testing the maximum loads of notchless specimens of the same size. The former type leads to simpler calculations but has the drawback that the material strength to calculate the maximum load for zero size depends on specimen geometry. Both types of the zero-brittleness version of the size-effect method are validated by previously reported test data. The proposed method should also be applicable to other quasibrittle materials such as rock, ice, tough ceramics, and brittle composites.
    URI
    http://yetl.yabesh.ir/yetl/handle/yetl/84410
    Collections
    • Journal of Engineering Mechanics

    DSpace software copyright © 2002-2015  DuraSpace
    Contact Us | Send Feedback
    Theme by 
    @mire NV
     

     

    Browse

    All of DSpaceCommunities & CollectionsBy Issue DateAuthorsTitlesSubjectsThis CollectionBy Issue DateAuthorsTitlesSubjects

    My Account

    LoginRegister

    Statistics

    View Usage Statistics

    DSpace software copyright © 2002-2015  DuraSpace
    Contact Us | Send Feedback
    Theme by 
    @mire NV