Show simple item record

dc.contributor.authorAmnon Katz
dc.contributor.authorVictor C. Li
dc.date.accessioned2017-05-08T22:37:31Z
dc.date.available2017-05-08T22:37:31Z
dc.date.copyrightDecember 1995
dc.date.issued1995
dc.identifier.other%28asce%290733-9399%281995%29121%3A12%281340%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/84173
dc.description.abstractThis paper presents an analytic model, which describes the bridging load and fiber stress developed when an inclined brittle fiber bridges a crack. The coupled effect of fiber bending and axial loading is explicitly accounted for. The model also considers matrix spalling and concentration of friction load at the point where the fiber bends over the matrix. With this model, it is possible to test the influence of fiber and matrix parameters on the bridging load and fiber stress, in order to achieve more efficient use of the fibers. Good comparison of the model predictions with experimental results of the inclined carbon-fiber test was achieved, both for the bridging load and the spall length. The model can serve as a useful tool to predict the efficiency of inclined fibers bridging a matrix crack.
dc.publisherAmerican Society of Civil Engineers
dc.titleInclination Angle Effect of Carbon Fibers in Cementitious Composites
dc.typeJournal Paper
dc.journal.volume121
dc.journal.issue12
dc.journal.titleJournal of Engineering Mechanics
dc.identifier.doi10.1061/(ASCE)0733-9399(1995)121:12(1340)
dc.treeJournal of Engineering Mechanics:;1995:;Volume ( 121 ):;issue: 012
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record