Show simple item record

dc.contributor.authorC. Sun
dc.contributor.authorW. J. D. Shaw
dc.contributor.authorA. M. Vinogradov
dc.date.accessioned2017-05-08T22:37:26Z
dc.date.available2017-05-08T22:37:26Z
dc.date.copyrightJanuary 1995
dc.date.issued1995
dc.identifier.other%28asce%290733-9399%281995%29121%3A1%2871%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/84129
dc.description.abstractAn elastic ring in rigid confinement may buckle inward when pressure is applied by a uniform inward movement of the confining rigid frame, particularly when a defect or initial inward deflection is present. As a result, the buckled portion of the ring becomes free of boundary pressure. This problem is known as shrink buckling, contact buckling, or one-way buckling. This problem was investigated by using three different approaches: the discrete method, the finite-element method, and an experimental method. A discrete-element model for the stability of thin rings confined within rigid boundaries was first developed, and then the critical buckling condition was derived from equilibrium equations. The frictional effect at the interface between the ring and the boundary was then taken into consideration. A finite-element model was developed and ANSYS 4.4 was used to carry out the calculations. The results from the discrete model were compared with the results from the finite-element analysis, and finally were verified by experimental results.
dc.publisherAmerican Society of Civil Engineers
dc.titleDiscrete-Element Model for Buckling Analysis of Thin Ring Confined Within Rigid Boundary
dc.typeJournal Paper
dc.journal.volume121
dc.journal.issue1
dc.journal.titleJournal of Engineering Mechanics
dc.identifier.doi10.1061/(ASCE)0733-9399(1995)121:1(71)
dc.treeJournal of Engineering Mechanics:;1995:;Volume ( 121 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record