Show simple item record

dc.contributor.authorPartha P. Sarkar
dc.contributor.authorNicholas P. Jones
dc.contributor.authorRobert H. Scanlan
dc.date.accessioned2017-05-08T22:37:22Z
dc.date.available2017-05-08T22:37:22Z
dc.date.copyrightAugust 1994
dc.date.issued1994
dc.identifier.other%28asce%290733-9399%281994%29120%3A8%281718%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/84104
dc.description.abstractSimultaneous extraction of all the aeroelastic parameters of a flexible bridge deck from a single section‐model test has been a desirable goal not fully attained in the past. In the work reported herein, an experimental setup was designed for executing coupled vertical‐torsional motion of a section model. In the present instance, the section model was located in proximity to a fixed model representing a section of the adjacent deck of a twin‐deck configuration. A robust system‐identification method was developed and applied to the noise‐corrupted displacement time histories of the section model. The experimental setup, the method of extracting the aeroelastic parameters, and the implications of the results obtained are presented in this paper. The tests were performed under both smooth and turbulent flow conditions, and in both the presence and absence of the second deck. This technique proved to offer good performance, which is evident from the consistent aeroelastic parameters obtained.
dc.publisherAmerican Society of Civil Engineers
dc.titleIdentification of Aeroelastic Parameters of Flexible Bridges
dc.typeJournal Paper
dc.journal.volume120
dc.journal.issue8
dc.journal.titleJournal of Engineering Mechanics
dc.identifier.doi10.1061/(ASCE)0733-9399(1994)120:8(1718)
dc.treeJournal of Engineering Mechanics:;1994:;Volume ( 120 ):;issue: 008
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record