Show simple item record

dc.contributor.authorChris P. Pantelides
dc.contributor.authorGregory P. Sallee
dc.contributor.authorJoseph E. Minor
dc.date.accessioned2017-05-08T22:37:15Z
dc.date.available2017-05-08T22:37:15Z
dc.date.copyrightMay 1994
dc.date.issued1994
dc.identifier.other%28asce%290733-9399%281994%29120%3A5%281076%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/84053
dc.description.abstractA mechanical test is described that can be used to measure the edge strength of annealed and heat‐strengthened glass. The mechanical test apparatus stresses only one of the two edge‐lines on the edge of a glass specimen. The testing concept employs the theory of unsymmetrical bending. The test device loads glass specimens in a manner that places tensile stresses on the tested edge‐line while keeping the other edge‐lines at zero stress or in compression. In annealed glass tests, the scored edge‐line was found to be 20% weaker than the edge‐line opposite the scored edge‐line. Comparisons between the edge strengths of annealed and heat strengthened glass revealed that the mean edge strength of heat strengthened glass is larger than that of annealed glass by about 50%.
dc.publisherAmerican Society of Civil Engineers
dc.titleEdge Strength of Window Glass by Mechanical Test
dc.typeJournal Paper
dc.journal.volume120
dc.journal.issue5
dc.journal.titleJournal of Engineering Mechanics
dc.identifier.doi10.1061/(ASCE)0733-9399(1994)120:5(1076)
dc.treeJournal of Engineering Mechanics:;1994:;Volume ( 120 ):;issue: 005
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record