Show simple item record

dc.contributor.authorVictor C. Li
dc.contributor.authorYin‐Wen Chan
dc.date.accessioned2017-05-08T22:37:13Z
dc.date.available2017-05-08T22:37:13Z
dc.date.copyrightApril 1994
dc.date.issued1994
dc.identifier.other%28asce%290733-9399%281994%29120%3A4%28707%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/84032
dc.description.abstractTheoretical models of mechanical properties of fiber reinforced cementitious composites require assumptions of fiber‐cement interfacial behavior. In this paper, strength‐based and fracture‐based fiber debonding criteria are reviewed. To determine whether interfacial debonding is governed by the bond strength or critical energy release rate of the fiber‐matrix interphase, fiber pull‐out experiments were conducted using steel and brass wires of various diameters. The bond properties, including effective bond strength and frictional stress, were interpreted through a theoretical model of fiber pull‐out. It was found that, for the material systems tested, interfacial debonding is dominated by frictional stress which is independent of the fiber diameters. Therefore, the debond mode of these material systems is categorized as strength‐based. In general, the debond mode is a material characteristic and is dependent on the specific fiber and matrix types. In order to precisely predict the mechanical response of a fiber reinforced cementitious composite, it is necessary to determine the debond mode for a particular material system following the methodology proposed in this paper.
dc.publisherAmerican Society of Civil Engineers
dc.titleDetermination of Interfacial Debond Mode for Fiber‐Reinforced Cementitious Composites
dc.typeJournal Paper
dc.journal.volume120
dc.journal.issue4
dc.journal.titleJournal of Engineering Mechanics
dc.identifier.doi10.1061/(ASCE)0733-9399(1994)120:4(707)
dc.treeJournal of Engineering Mechanics:;1994:;Volume ( 120 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record