Show simple item record

dc.contributor.authorC. Ouyang
dc.contributor.authorA. Pacios
dc.contributor.authorS. P. Shah
dc.date.accessioned2017-05-08T22:37:09Z
dc.date.available2017-05-08T22:37:09Z
dc.date.copyrightDecember 1994
dc.date.issued1994
dc.identifier.other%28asce%290733-9399%281994%29120%3A12%282641%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/83988
dc.description.abstractFibers with inclination angles of 0°, 14°, 27°, and 37°, respectively, were pulled out from a cementitious matrix. For each inclination angle, two types of specimens with 16 and eight steel fibers, respectively, were tested. Effects of fiber inclination and number of fibers on peak pullout load and corresponding slip were experimentally examined. Based on failure mechanisms experimentally observed, a fracture mechanics model was developed to predict pullout resistance of aligned and inclined fibers. A rising
dc.publisherAmerican Society of Civil Engineers
dc.titlePullout of Inclined Fibers from Cementitious Matrix
dc.typeJournal Paper
dc.journal.volume120
dc.journal.issue12
dc.journal.titleJournal of Engineering Mechanics
dc.identifier.doi10.1061/(ASCE)0733-9399(1994)120:12(2641)
dc.treeJournal of Engineering Mechanics:;1994:;Volume ( 120 ):;issue: 012
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record