Show simple item record

dc.contributor.authorC. D. Huang
dc.contributor.authorW. Q. Zhu
dc.contributor.authorT. T. Soong
dc.date.accessioned2017-05-08T22:37:04Z
dc.date.available2017-05-08T22:37:04Z
dc.date.copyrightJanuary 1994
dc.date.issued1994
dc.identifier.other%28asce%290733-9399%281994%29120%3A1%28177%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/83936
dc.description.abstractThe response and reliability of a linear secondary system attached to a multi‐degree‐of‐freedom yielding primary structure under white‐noise or filtered white‐noise excitations are studied by using equivalent linearization and digital simulation. It is shown that the effect of the primary‐structure yielding on response and reliability of the secondary system mainly depends on the ratio of the secondary‐system natural frequency to the natural frequencies of the primary structure and on the excitation spectral density shape in the range of natural frequencies of the primary structure. Under white‐noise excitation, amplification of the secondary system response results due both to tuning of the secondary system with one of the modes of the postyield primary structure and to an increase in excitation spectral density values at natural frequencies of the postyield primary structure. High‐frequency amplification is possible in this case. It is also shown that amplification of the secondary system response can be alleviated by increasing the damping ratio of the secondary system and by positioning the secondary system at higher levels of the primary structure.
dc.publisherAmerican Society of Civil Engineers
dc.titleNonlinear Stochastic Response and Reliability of Secondary Systems
dc.typeJournal Paper
dc.journal.volume120
dc.journal.issue1
dc.journal.titleJournal of Engineering Mechanics
dc.identifier.doi10.1061/(ASCE)0733-9399(1994)120:1(177)
dc.treeJournal of Engineering Mechanics:;1994:;Volume ( 120 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record