Show simple item record

dc.contributor.authorC. J. Burgoyne
dc.contributor.authorR. Dilmaghanian
dc.date.accessioned2017-05-08T22:36:54Z
dc.date.available2017-05-08T22:36:54Z
dc.date.copyrightMarch 1993
dc.date.issued1993
dc.identifier.other%28asce%290733-9399%281993%29119%3A3%28439%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/83863
dc.description.abstractBicycle wheels achieve their structural efficiency by making use of prestressing in three ways. Tests show that the bottom spokes carry virtually all the load by compressive forces, which reduce the tensile prestress set up in the spokes when the wheel was made. The test results are compared with an analysis that considers the spokes as a disk that can carry force in one direction only. This is shown to give good agreement, as does an analysis that considers the rim as a straight beam on an elastic foundation. The behavior of the wheel with an inflated tire is also considered, and it is shown that good comparisons with theory are obtained if the reaction from the road is assumed to be distributed over a specific length of the rim. Prestressing is shown to be important also in the mechanism by which the various forces are transmitted through the tire from the road to the rim.
dc.publisherAmerican Society of Civil Engineers
dc.titleBicycle Wheel as Prestressed Structure
dc.typeJournal Paper
dc.journal.volume119
dc.journal.issue3
dc.journal.titleJournal of Engineering Mechanics
dc.identifier.doi10.1061/(ASCE)0733-9399(1993)119:3(439)
dc.treeJournal of Engineering Mechanics:;1993:;Volume ( 119 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record