Show simple item record

dc.contributor.authorNorio Hasebe
dc.contributor.authorMasahiro Miwa
dc.contributor.authorTakuji Nakamura
dc.date.accessioned2017-05-08T22:36:53Z
dc.date.available2017-05-08T22:36:53Z
dc.date.copyrightFebruary 1993
dc.date.issued1993
dc.identifier.other%28asce%290733-9399%281993%29119%3A2%28211%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/83844
dc.description.abstractThe second mixed‐boundary‐value problem is solved by the classical theory of thin‐plate bending. The mixed boundary consists of a boundary of simple supported type and that of external forces. The boundary of simple support is straight and the remain is arbitrary configuration and a closed‐form solution is obtained. Complex stress functions and a rational mapping function are used for the analysis. As an example to derive a general solution, a half‐plane with a crack subject to uniform bending moment is considered. The crack initiates from an end of the simple support due to stress concentration. Stress distributions before and after the crack initiation are obtained. The influence of the simple support and a crack on the stress is investigated. Stress intensity factors are obtained from short to long crack and for some Poisson's ratio.
dc.publisherAmerican Society of Civil Engineers
dc.titleSecond Mixed‐Boundary‐Value Problem for Thin‐Plate Bending
dc.typeJournal Paper
dc.journal.volume119
dc.journal.issue2
dc.journal.titleJournal of Engineering Mechanics
dc.identifier.doi10.1061/(ASCE)0733-9399(1993)119:2(211)
dc.treeJournal of Engineering Mechanics:;1993:;Volume ( 119 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record