Show simple item record

dc.contributor.authorJ. M. Torrenti
dc.contributor.authorE. H. Benaija
dc.contributor.authorC. Boulay
dc.date.accessioned2017-05-08T22:36:52Z
dc.date.available2017-05-08T22:36:52Z
dc.date.copyrightDecember 1993
dc.date.issued1993
dc.identifier.other%28asce%290733-9399%281993%29119%3A12%282369%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/83827
dc.description.abstractHow do boundary conditions influence strain localization in concrete loaded in compression? To answer this question, compressive tests were performed on prismatic specimens of mortar. The blocking or nonblocking of rotation of the top platen of the press and the use or absence of an antifriction system have led us to consider four different boundary conditions. The onset of strain localization and its development in the course of loading are determined by the stereophotogrammetric method. The results obtained show that rotation (when it is free) always starts after the peak load. The postpeak portion of the load‐displacement curve depends to a very large extent on the boundary conditions: the use of an antifriction system increases the mean slope of this part. But, on the other hand, the onset of strain localization occurs at the peak, whatever the boundary conditions.
dc.publisherAmerican Society of Civil Engineers
dc.titleInfluence of Boundary Conditions on Strain Softening in Concrete Compression Test
dc.typeJournal Paper
dc.journal.volume119
dc.journal.issue12
dc.journal.titleJournal of Engineering Mechanics
dc.identifier.doi10.1061/(ASCE)0733-9399(1993)119:12(2369)
dc.treeJournal of Engineering Mechanics:;1993:;Volume ( 119 ):;issue: 012
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record