Show simple item record

dc.contributor.authorF. Lu
dc.contributor.authorA. N. Sherbourne
dc.date.accessioned2017-05-08T22:36:51Z
dc.date.available2017-05-08T22:36:51Z
dc.date.copyrightNovember 1993
dc.date.issued1993
dc.identifier.other%28asce%290733-9399%281993%29119%3A11%282174%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/83811
dc.description.abstractThe load carrying capacity of a rectangular section is investigated. Using Hencky's total strain theory, interaction relations between axial force, shear and bending moment are obtained for an elastic‐linear strain hardening material. A unified set of equations are presented which can be reduced for any combination of forces and any simpler modeling of materials, including the elastic‐perfectly plastic material. Although the results are generally limited to proportional loading, the accuracy is quite acceptable in most cases, as long as all the applied loads increase monotonically in a quasi‐proportional manner. As a demonstration of the possible broader usage of the derived equations, beam columns under combined loading are examined using the existing approximate beam‐column theory. The results indicate that strain hardening is important in certain situations, particularly when the beam is bulkier. The same principle can be applied to other types of structural sections such as I‐beams.
dc.publisherAmerican Society of Civil Engineers
dc.titleStrain Hardening Beams under Shear, Bending, and Axial Forces
dc.typeJournal Paper
dc.journal.volume119
dc.journal.issue11
dc.journal.titleJournal of Engineering Mechanics
dc.identifier.doi10.1061/(ASCE)0733-9399(1993)119:11(2174)
dc.treeJournal of Engineering Mechanics:;1993:;Volume ( 119 ):;issue: 011
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record