Show simple item record

dc.contributor.authorF. Lu
dc.contributor.authorA. N. Sherbourne
dc.date.accessioned2017-05-08T22:36:47Z
dc.date.available2017-05-08T22:36:47Z
dc.date.copyrightSeptember 1992
dc.date.issued1992
dc.identifier.other%28asce%290733-9399%281992%29118%3A9%281840%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/83763
dc.description.abstractThe concept of the moving‐hinge technique is discussed and compared with the classical stationary hinge approach, i.e., limit analysis, in the context of large‐displacement arch problems. With the assumption of a rigid‐perfectly plastic material and the neglect of axial and shear effects, the key equations are derived both algebraically and graphically considering a discontinuous curvature jump at the moving hinge. The problem of a circular ring crushed between two rigid plates is examined to illustrate its application. With reference to the actual deformation mode in experiments, a deformed quarter ring is modeled using three segments of arc, with two moving hinges being sandwiched in between. By using the moving hinge, a better load‐displacement curve can be obtained as opposed to conventional limit analysis, provided that the deformation mode is appropriately represented. The present three‐segment model can be further refined to include additional segments or moving hinges, thus improving predictions of the applied load from a known deformation mode.
dc.publisherAmerican Society of Civil Engineers
dc.titleMoving Hinge in Large‐Displacement Problems
dc.typeJournal Paper
dc.journal.volume118
dc.journal.issue9
dc.journal.titleJournal of Engineering Mechanics
dc.identifier.doi10.1061/(ASCE)0733-9399(1992)118:9(1840)
dc.treeJournal of Engineering Mechanics:;1992:;Volume ( 118 ):;issue: 009
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record