Show simple item record

dc.contributor.authorMahesh D. Pandey
dc.contributor.authorArchibald N. Sherbourne
dc.date.accessioned2017-05-08T22:36:40Z
dc.date.available2017-05-08T22:36:40Z
dc.date.copyrightJune 1992
dc.date.issued1992
dc.identifier.other%28asce%290733-9399%281992%29118%3A6%281249%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/83719
dc.description.abstractThe paper addresses the problem of finding an optimum thickness distribution for a rectangular, isotropic plate of given volume and plan dimensions (length and width) that would maximize its uniaxial buckling load, loosely referred to as shape optimization. Earlier studies suggest that optimal profiles are not only characterized by a concave thickness distribution with higher values near the edges compared to the center, but also by a convex distribution with very high thickness at the center compared with the edges. This paradox regarding the nature of the optimal thickness distribution is the subject of the present investigation. It is established that the qualitative nature of optimal thickness distribution is dependent on the assumptions made regarding the prebuckling loading state, that is, whether the uniaxial stress or force per unit length remains constant. The paper also highlights the fact that shape optimization is seriously limited by local buckling considerations and illustrates the interactions between thickness variation, the nature of the prebuckling state, and the influence of boundary conditions in the global context of plate instability.
dc.publisherAmerican Society of Civil Engineers
dc.titleMechanics of Shape Optimization in Plate Buckling
dc.typeJournal Paper
dc.journal.volume118
dc.journal.issue6
dc.journal.titleJournal of Engineering Mechanics
dc.identifier.doi10.1061/(ASCE)0733-9399(1992)118:6(1249)
dc.treeJournal of Engineering Mechanics:;1992:;Volume ( 118 ):;issue: 006
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record