Show simple item record

dc.contributor.authorC. M. Wang
dc.contributor.authorK. M. Liew
dc.contributor.authorW. A. M. Alwis
dc.date.accessioned2017-05-08T22:36:34Z
dc.date.available2017-05-08T22:36:34Z
dc.date.copyrightApril 1992
dc.date.issued1992
dc.identifier.other%28asce%290733-9399%281992%29118%3A4%28651%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/83672
dc.description.abstractThe paper considers the elastic buckling of skew plates subjected to in‐plane loadings. The buckling analysis is performed using the Rayleigh‐Ritz method with the newly proposed pb‐2 Ritz functions, which consist of the product of a two‐dimensional polynomial function and a basic function. The basic function is formed from taking the product of the equations of the boundaries, with each equation raised to the power of 0,1, or 2 corresponding to free, simply supported, or clamped edges; thus satisfying the kinematic boundary conditions at the outset. With pb‐2 Ritz functions, the analyst avoids the difficulty of searching for the appropriate function for any arbitrarily shaped plates with various combinations of supporting‐edge conditions. Using this efficient and accurate pb‐2 Rayleigh‐Ritz method, buckling solutions are obtained and presented in the form of design charts for skew plates with different edge conditions, angles, and aspect ratios. In addition, the differing viewpoints on the kinematic condition for a corner formed by two simply supported edges are discussed.
dc.publisherAmerican Society of Civil Engineers
dc.titleBuckling of Skew Plates and Corner Condition for Simply Supported Edges
dc.typeJournal Paper
dc.journal.volume118
dc.journal.issue4
dc.journal.titleJournal of Engineering Mechanics
dc.identifier.doi10.1061/(ASCE)0733-9399(1992)118:4(651)
dc.treeJournal of Engineering Mechanics:;1992:;Volume ( 118 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record