Show simple item record

dc.contributor.authorTadayoshi Aida
dc.contributor.authorSusumu Toda
dc.contributor.authorNorio Ogawa
dc.contributor.authorYasuo Imada
dc.date.accessioned2017-05-08T22:36:31Z
dc.date.available2017-05-08T22:36:31Z
dc.date.copyrightFebruary 1992
dc.date.issued1992
dc.identifier.other%28asce%290733-9399%281992%29118%3A2%28248%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/83642
dc.description.abstractDynamic vibration absorbers with one degree of freedom are generally applied to the passive control of beam vibration. These absorbers are useful to control a single mode of vibration under harmonic excitation. In this paper, a beam‐type dynamic vibration absorber is presented and is composed of a beam (dynamic absorbing beam) under the same boundary conditions as the main beam and uniformly distributed, connecting spring and damper between the main beam and absorbing beam. Equations of motion of the system in modal coordinates of the main beam become equal to those of the two‐degrees‐of‐freedom system with two masses and three springs. Formulas for optimum design of the beam‐type dynamic vibration absorber are proposed by using the optimum design method of a dynamic absorber in two degrees of freedom, obtained by Den Hartog's method. Numerical calculations indicated the response of the main beam without damping is reduced with the exception of the response of the second mode, and the one with damping is remarkably reduced.
dc.publisherAmerican Society of Civil Engineers
dc.titleVibration Control of Beams by Beam‐Type Dynamic Vibration Absorbers
dc.typeJournal Paper
dc.journal.volume118
dc.journal.issue2
dc.journal.titleJournal of Engineering Mechanics
dc.identifier.doi10.1061/(ASCE)0733-9399(1992)118:2(248)
dc.treeJournal of Engineering Mechanics:;1992:;Volume ( 118 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record