Show simple item record

dc.contributor.authorJuha Paavola
dc.contributor.authorSeppo Salonen
dc.date.accessioned2017-05-08T22:36:31Z
dc.date.available2017-05-08T22:36:31Z
dc.date.copyrightDecember 1992
dc.date.issued1992
dc.identifier.other%28asce%290733-9399%281992%29118%3A12%282384%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/83633
dc.description.abstractThis paper discusses the problem of flexural‐torsional stability of columns with open thin‐walled cross sections. It introduces an analytical solution technique applicable to the differential equation system describing the current problem. The approach derived is more comprehensive than those presented traditionally in the literature and is applicable in determining the value of critical load due to combined buckling modes. The system considered consists of three separate differential equations that are coupled in a general case. Various symmetries of the cross section release these couplings. This presentation is limited, for simplicity, only to columns having singly symmetric cross sections, or at least cross sections of point symmetry. Thus, there are couplings between two of the governing equations, The elastic restraints having varying stiffnesses with respect to translation, rotation, torsion and warping, separately, have been studied as boundary conditions through numerical examples. The stiffnesses of the restraints applied are chosen to cover the range from zero to infinity.
dc.publisherAmerican Society of Civil Engineers
dc.titleFlexural‐Torsional Stability of Thin‐Walled Columns
dc.typeJournal Paper
dc.journal.volume118
dc.journal.issue12
dc.journal.titleJournal of Engineering Mechanics
dc.identifier.doi10.1061/(ASCE)0733-9399(1992)118:12(2384)
dc.treeJournal of Engineering Mechanics:;1992:;Volume ( 118 ):;issue: 012
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record