Show simple item record

dc.contributor.authorChristopher K. Y. Leung
dc.date.accessioned2017-05-08T22:36:30Z
dc.date.available2017-05-08T22:36:30Z
dc.date.copyrightNovember 1992
dc.date.issued1992
dc.identifier.other%28asce%290733-9399%281992%29118%3A11%282298%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/83626
dc.description.abstractThe mechanical performance of brittle and quasi‐brittle materials can be significantly improved by the introduction of fibers. Fiber debonding, which results in the formation of bridging ligaments at the wake of cracks, is the major mechanism accounting for performance improvement. A strength‐based two‐way debonding theory, which accounts for fiber debonding at both the pulled and embedded ends, has recently been developed. In this paper, two‐way debonding based on a fracture criterion is considered. With the fracture‐based debonding theory, expressions for fiber stress and displacement, and thus the general de‐bonding features, are found to be similar to those given by the strength‐based theory. However, interpreting the same interfacial measurement (such as a pull‐out test record) with the strength and fracture approaches will lead to predictions of different debonding behavior in composites with practical volume fractions. To determine whether debonding is governed by strength or fracture, interfacial properties should be measured from a number of specimens with different fiber sizes or fiber volume fractions.
dc.publisherAmerican Society of Civil Engineers
dc.titleFracture‐Based Two‐Way Debonding Model for Discontinuous Fibers in Elastic Matrix
dc.typeJournal Paper
dc.journal.volume118
dc.journal.issue11
dc.journal.titleJournal of Engineering Mechanics
dc.identifier.doi10.1061/(ASCE)0733-9399(1992)118:11(2298)
dc.treeJournal of Engineering Mechanics:;1992:;Volume ( 118 ):;issue: 011
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record