Show simple item record

dc.contributor.authorLaurence J. Jacobs
dc.date.accessioned2017-05-08T22:36:25Z
dc.date.available2017-05-08T22:36:25Z
dc.date.copyrightAugust 1991
dc.date.issued1991
dc.identifier.other%28asce%290733-9399%281991%29117%3A8%281878%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/83550
dc.description.abstractSeparation of crack growth signals is of fundamental importance for detecting, locating, and determining the significance of an internal flaw using acoustic emission techniques. The methodology used to determine the acoustic emission signal in this paper incorporates a source model that is an actual crack propagation and arrest event. This source model includes the effects of the following physical parameters: location of the crack, crack orientation, crack tip velocity, duration of crack propagation, and mode of fracture. The integral equation method is used to examine a semi‐infinite crack in an infinite, linear elastic body loaded under the conditions of plane strain. The dynamic mode I stress caused by a crack propagating with a prescribed velocity is determined, and then the displacements at any point are calculated. These time‐dependent displacements are the analytical form of the acoustic emission waveforms. Numerical results examine the effect of crack tip velocity, duration of propagation, and distance from the crack source to the point of observation on the calculated acoustic emission signals.
dc.publisherAmerican Society of Civil Engineers
dc.titleCharacterization of Acoustic Emission Signals from Mode I Crack
dc.typeJournal Paper
dc.journal.volume117
dc.journal.issue8
dc.journal.titleJournal of Engineering Mechanics
dc.identifier.doi10.1061/(ASCE)0733-9399(1991)117:8(1878)
dc.treeJournal of Engineering Mechanics:;1991:;Volume ( 117 ):;issue: 008
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record