Show simple item record

dc.contributor.authorMichel S. Chalhoub
dc.contributor.authorJames M. Kelly
dc.date.accessioned2017-05-08T22:36:25Z
dc.date.available2017-05-08T22:36:25Z
dc.date.copyrightAugust 1991
dc.date.issued1991
dc.identifier.other%28asce%290733-9399%281991%29117%3A8%281791%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/83543
dc.description.abstractMultilayered elastomeric bearings are a basic component in base isolation systems. Several design formulas that have been developed and used in the past consider the elastomer as incompressible. In this paper, the effect of bulk compressibility is included, and the governing equations for the hydrostatic pressure in the elastomer are developed and solved for a pad with a long, rectangular cross section. The resulting expressions are simplified and recommended for the design of elastomeric bearings. The formulas that include the effect of bulk compressibility predict the real behavior of such bearings more accurately than the conventionally used ones. The compressive and flexural stiffnesses of a rubber pad and the pressure distribution on its loaded surface depend on the bulk compressibility of the elastomer, and this dependence is more significant for larger shape factors.
dc.publisherAmerican Society of Civil Engineers
dc.titleAnalysis of Infinite‐Strip‐Shaped Base Isolator with Elastomer Bulk Compression
dc.typeJournal Paper
dc.journal.volume117
dc.journal.issue8
dc.journal.titleJournal of Engineering Mechanics
dc.identifier.doi10.1061/(ASCE)0733-9399(1991)117:8(1791)
dc.treeJournal of Engineering Mechanics:;1991:;Volume ( 117 ):;issue: 008
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record