Show simple item record

dc.contributor.authorA. Newport
dc.contributor.authorG. Glinka
dc.date.accessioned2017-05-08T22:36:19Z
dc.date.available2017-05-08T22:36:19Z
dc.date.copyrightJune 1991
dc.date.issued1991
dc.identifier.other%28asce%290733-9399%281991%29117%3A6%281257%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/83506
dc.description.abstractThe results of the stress analysis of a threaded tubular connection, obtained by using a hybrid analogue‐numerical method, are discussed in the paper. The model enabled both the tooth loads and the local tooth fillet stresses to be calculated. In particular, the local stresses resulting from cyclic axial loading and preload are discussed in detail. It is shown that the stress concentration factor at the critical tooth of a preloaded connection varies as axial load is applied from zero to its maximum value. However, the ratio of the local stress range at the root of the tooth to the nominal average axial stress range at this tooth remains constant. It is demonstrated that preloading a threaded connection reduces the local stress range and increases the local mean stress in comparison with connections without preload subjected to the same cyclic loading.
dc.publisherAmerican Society of Civil Engineers
dc.titleConcentration of Cyclic Stresses in Preloaded Threaded Connections
dc.typeJournal Paper
dc.journal.volume117
dc.journal.issue6
dc.journal.titleJournal of Engineering Mechanics
dc.identifier.doi10.1061/(ASCE)0733-9399(1991)117:6(1257)
dc.treeJournal of Engineering Mechanics:;1991:;Volume ( 117 ):;issue: 006
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record