Show simple item record

dc.contributor.authorPeter H. Feenstra
dc.contributor.authorRené de Borst
dc.contributor.authorJan G. Rots
dc.date.accessioned2017-05-08T22:36:14Z
dc.date.available2017-05-08T22:36:14Z
dc.date.copyrightApril 1991
dc.date.issued1991
dc.identifier.other%28asce%290733-9399%281991%29117%3A4%28754%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/83465
dc.description.abstractDiscrete cracks have been modeled with interface elements in which the tractions are related to the relative displacements of the crack sides. Three stages in the cracking process can be distinguished: (1) The linear‐elastic state; (2) the development state in which a tension‐softening model is used; and (3) the open‐crack state, for which five different crack‐dilatancy models have been implemented. The predictions of these crack‐dilatancy models have been compared mutually as well as with available experimental data. The discrete‐crack elements have subsequently been used in an analysis of an experiment on crack dilatancy. Again, the results for the various crack‐dilatancy models are compared. Finally, a nonlinear analysis of a moderately deep shear‐critical beam is presented including aggregate‐interlock effects.
dc.publisherAmerican Society of Civil Engineers
dc.titleNumerical Study on Crack Dilatancy Part 2: Applications
dc.typeJournal Paper
dc.journal.volume117
dc.journal.issue4
dc.journal.titleJournal of Engineering Mechanics
dc.identifier.doi10.1061/(ASCE)0733-9399(1991)117:4(754)
dc.treeJournal of Engineering Mechanics:;1991:;Volume ( 117 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record