Show simple item record

dc.contributor.authorS. Krenk
dc.contributor.authorL. Damkilde
dc.date.accessioned2017-05-08T22:36:05Z
dc.date.available2017-05-08T22:36:05Z
dc.date.copyrightNovember 1991
dc.date.issued1991
dc.identifier.other%28asce%290733-9399%281991%29117%3A11%282457%29.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/83391
dc.description.abstractA simple theory is developed for the coupled warping and cross‐sectional distortion at joints between thin‐walled I‐beams. Continuity of the joined flanges and the local character of the cross‐sectional distortion permit the distortion deformation to be expressed in terms of the warping parameters of the two beams at the joint. Four types of joints are treated. The unstiffened joint has two independent warping parameters, the two partially stiffened joints each have a single warping parameter, while the fully stiffened joint prevents warping. The distortion mode acts as a local spring stiffness. The formulation is fully compatible with classical thin‐walled beam theory, and detailed three‐dimensional finite element analyses demonstrate high accuracy of the theory.
dc.publisherAmerican Society of Civil Engineers
dc.titleWarping of Joints in I‐Beam Assemblages
dc.typeJournal Paper
dc.journal.volume117
dc.journal.issue11
dc.journal.titleJournal of Engineering Mechanics
dc.identifier.doi10.1061/(ASCE)0733-9399(1991)117:11(2457)
dc.treeJournal of Engineering Mechanics:;1991:;Volume ( 117 ):;issue: 011
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record