Show simple item record

dc.contributor.authorChao Dou
dc.contributor.authorYong-Lin Pi
dc.date.accessioned2017-05-08T22:36:02Z
dc.date.available2017-05-08T22:36:02Z
dc.date.copyrightSeptember 2016
dc.date.issued2016
dc.identifier.other51423494.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/83357
dc.description.abstractThis paper deals with the effects of geometric imperfections on flexural inelastic buckling resistance of axially loaded columns with equally spaced lateral braces and presents a simplified way of forming the critical geometric imperfection for finite-element analyses, which leads to rational results for buckling resistances. First, laterally braced columns with geometric imperfections formed by the traditional single half sine wave or the eigenbuckling modes were analyzed by FEM to illustrate the effect of different imperfection shapes. Second, geometric imperfections of columns acquired from measurements in laboratory tests were adopted, and the statistical characteristic and probability distribution of initial deflections along the column length were obtained; then, extensive numerical results from finite-element analyses were obtained through random imperfection simulations. Last, the comparison was made between statistical results based on the random imperfections and those based on eigenbuckling modes to propose a critical geometric imperfection shape as a linear superposition of a limited number of scaled eigenbuckling modes, making it possible to obtain a rational buckling resistance result by one-time analysis, which is safe but not too conservative. The commonly used lowest eigenbuckling mode or equivalent sine shape for initial geometric imperfections do not provide a rational prediction for the inelastic buckling resistance of laterally braced columns. The critical geometric imperfection shape presented in this paper can be used in advanced analysis for inelastic buckling resistance of braced columns.
dc.publisherAmerican Society of Civil Engineers
dc.titleEffects of Geometric Imperfections on Flexural Buckling Resistance of Laterally Braced Columns
dc.typeJournal Paper
dc.journal.volume142
dc.journal.issue9
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0001508
dc.treeJournal of Structural Engineering:;2016:;Volume ( 142 ):;issue: 009
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record