Show simple item record

dc.contributor.authorTomas Plesnik
dc.contributor.authorJeffrey Erochko
dc.contributor.authorGhasan Doudak
dc.date.accessioned2017-05-08T22:35:59Z
dc.date.available2017-05-08T22:35:59Z
dc.date.copyrightJuly 2016
dc.date.issued2016
dc.identifier.other51322936.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/83328
dc.description.abstractThe shear strength and stiffness of light-frame wood shear walls is highly dependent on the behavior of their individual nailed connections. Eighty-four nailed connection specimens were tested under shear loading to determine the effect of including rigid insulation as an intermediate material between the sheathing and framing elements in a light-frame wood shear wall. Each specimen contained common 10d or 16d nails, 15.9 mm oriented strandboard sheathing, spruce-pine-fir lumber, and rigid insulation in varied thicknesses between 0 and 38.1 mm. From the load-deformation results, maximum load, yield load, and stiffness were assessed using curve-fitting and yield-point determination methods. The results indicate that, as the insulation thickness increases, the connection strength and stiffness both exhibit a steep reduction. In addition, nonlinear two-dimensional (2D) finite-element models of the same nailed connections were developed. These models showed good correlation with experimental data and served to confirm that the decline in strength and stiffness observed in the tests is due to the introduction of the insulation.
dc.publisherAmerican Society of Civil Engineers
dc.titleNailed Connection Behavior in Light-Frame Wood Shear Walls with an Intermediate Layer of Insulation
dc.typeJournal Paper
dc.journal.volume142
dc.journal.issue7
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0001506
dc.treeJournal of Structural Engineering:;2016:;Volume ( 142 ):;issue: 007
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record